|
  
Photos are of the first RR v guitar I built with your templates, I made
some slight mods to the design, one was a relief to the body for fret access
up top and the other was a bridge mod to utilize a Floyd Rose tremolo.
Guitar is 25.5 scale, bolt on maple neck, 24 fret rosewood fret board,
jumbo fret wire, Alder body, single humbucker pickup with
volume only, recessed Floyd rose tremolo with locking nut.
  
The photos are of the second RR v that I built using your templates, same
mod's to the design as the first guitar, built from mahogany.
Guitar is 25.5 scale, bolt on mahogany neck, 22 fret rosewood fret
board, jumbo fret wire, mahogany body, two humbucker pickups with
2 volume and 2 tone, three way switch for pickups, recessed Floyd rose
tremolo with locking nut
Frank Bonnano built
the Randy Roads guitars above. They are slightly modified. Frank does
excellent work and can build nice RC Planes as well!
And, another awesome
guitar from Frank:
"Hi Ronny,
Once again your templates have proven worthy!
Here is a flying v that I just built utilizing your 1958 flying v template.
The guitar is 24-9/16 scale, the body is made from white Ash, set neck, neck
is birds eye maple, 15 degree one piece head stock scarf cut joined, rose wood
fret board, 14" radius on the fret board, jumbo fret wire, EMG HZ
pickups, H4A in the neck and H4 in the bridge, locking roller bridge, graphite
nut, 18:1 rotomatic tuners, finish is golden oak Danish oil and then waxed.
Thanks again
Frank Bonanno."
 
 
Brian Denney built
the guitar above. He flipped the template over and made it a lefty!
Gallery of guitars
built with my templates:
 
This Jazz Bass was
built by Wally Wallace.
 
Matt Vinson built
the Strat above in Sunburst Blue!
Mark Teed of Florida
built this sweet 59 Les Paul Standard. Excellent work Mark!
    
Ken Meyer from
Michigan built this awesome Flying V. I am speechless! And more from Ken
below. Check out the cool inlay work:
 
Check out the nice
example made from my Les Paul Double Cutaway template! Made by Eric Cellini.
Malen Anderson built
this beautiful Flying V.
  
Here are some fine
examples of craftsmanship. Built by Gary Lewis from the UK.
The guitar above was
built for Zakk Wylde by STEVE ZABRISKIE at Southern Cross Guitars in Vancouver
Washington.
This is my explorer I built using one of your 58 Explorer templates. I altered
the original plan and opted for a neck-through design. It is made of a maple
neck with mahogany wings, cocobolo fingerboard
and Emg Pickups. Thanks for the great template.
Mark McLane
Columbia, SC
Here is an image of a guitar I built using one of
your templates. This was made from your tele thinline template. It
is a Zebra Wood top with a painted Swamp Ash bottom. It has a Warmoth
twelve string neck & Stew Mac pickups. I've built several guitars
using the Strat and Tele templates I purchased from you. I've even
combined the two templates. Your product is by far the best from all
I've seen and used.
Thanks
Norbert Courville
Baton Rouge, LA
     
"Hello, Here are a few pictures of the guitar I built using your
templates. It was my first build and your templates were a huge help and it
turned out great(Plays Great). Thanks, Bryan"
Another Beauty by Kyle Harper. It is my RG template with a Strat
neck. You can
contact him at: guitarzan1143@hotmail.com
 
This is an awesome Mockingbird. This was made by a first time
builder! Justin Cavender from West Virginia built this guitar out of rock maple.
The beauty above
built by Matt Blahun of Blahun Guitars:
Here are the
specs: 56 Style, Alder Body, Maple Neck, Nitrocellulose
Finish, Lace Sensor Gold Pickups, Eric Clapton Active Mid Boost Kit,
Fender Vintage 57 Bridge, and Fender Vintage 57/62 Kluson Style Tuners
  
The
Cloud guitar built above by the owner/operator of www.ergoinstruments.com
If you have
purchased templates from us and have pictures to share, please send to sales@guitarbuildingtemplates.com
If you have a website, let me know and I will give you a plug with your picture.
|
