General information:

*These templates are for personal use and may not be used for commercial   purposes.  

*You are ultimately responsible for the quality and playability of the instrument you build.  Do not use these templates unless you have researched for neck/bridge placement, scale, etc.. Basic woodworking skills are recommended.  There are many books that will guide you through the building process.   See Links page.

*Please exercise caution when handling power tools.  You are responsible for your safety. Remember,  you need your fingers to play guitar!

* I cannot guarantee exact replicas.  Laser cutting tolerances, commercial instrument variations, and other factors make it impossible to make 100% accurate templates.  Most templates can be tailored to your taste by sanding or moving the template around during the building process.  Neck pockets are usually smaller so they can be sanded to exact tight fight and to use commercially available necks.  

*Guitar Building Templates is not affiliated with any artist or guitar company  referred to on this website and/or auction site used for the sale of these templates.  

*Template specifications are subject to change without notice.   In an ongoing effort to improve products, files are constantly being revised so templates may differ than those on pictures. Due to local wood supply,  material thickness may vary plus or minus one sixteenth of an inch.

*Shipping times are approximate and subject to change without notice.   Due to workload and slow cutting times , shipping timeframes can fluctuate dramatically.  NOTE:  CNC cuts are averaging 3-5 weeks before they ship.  Laser cuts are averaging 3-5 weeks before they ship as well.  Intl clients, add up to 2 week to above estimates. 

*There are not returns/refunds allowed.  If a template is found to be defective, we will replace/repair at out discretion.  

Current Production Schedule:

March 1-7, 2010:

Cutting orders placed through January 31, 2010

Intl clients, add up to 2 week to above estimates. 

Ebay purchases: 

Visa/MasterCard/Discover/American Express

To complete your purchase with credit card, please go here.

Paypal payments should be sent to: ebaysales@guitarbuildingtemplates.com

CNC Templates:

*All above applies to CNC cut templates

*Due to tool entry with my CNC application, most templates will have small notches that need to be sanded off. 

*CNC templates will require sanding to remove fuzz on edges caused by cutting tool.  Cleans easily in minutes with 150 grit sandpaper. Go here for more information on this: Sanding CNC Fuzz

*CNC templates do not include many of the extra templates as pictured for laser.  However,  all functions remain the same.  

*Please note that I can only cut about 10-12 inches per minute.  Anything above that and I lose accuracy.  It takes time to make a quality product. Please be patient, it is worth the wait!

*You are agree to the terms set above by making a purchase of any template on guitarbuildingtemplates.com and/or any auction site these templates are offered for sale.