|
RG
570
Based
on an older RG 570. Has Fender style Heel. CNC Cut on 5/16" Masonite.
$69 CNC
cut on 5/16" board
70's
Strat
Based
on 70's Strat with oversized headstock and squared style cavities.
$59 CNC
cut on 5/16" board
58
Explorer
Based
on the 1958 Explorer guitar. All shown in picture is included.
$69 CNC
cut on 5/16" board
Precision
Bass
Based
on the Standard Precision Bass. All shown in picture is included.
Pickguard is laser cut on 1/4" material. Everything else is 3/8"
cut.
$59 CNC
cut on 5/16" board
Jazz
Master
Based
on the Standard Jazzmaster guitar. All shown in picture is included.
$59 CNC
cut on 5/16" board
Contemp
22 and 24 fret Standard
Based
on the PRS Standard. Available in 22 or 24 fret version.
$59 CNC
cut on 5/16" board
The
following models are currently available: 57 Strat, 62 Strat, 70s
Strat, 58 Custom Shop Telecaster , Jazzmaster, 22 Fret PRS, 24 Fret PRS,
PRS single cutaway, Baretta, Dinky, Iceman, 1959 Les Paul
Standard, 1959 Les Paul Junior, Les Paul Double Cutway, 58 Flying V ($69 for
Flying V), 58
Explorer, Firebird, SG, Firebird, Precision Bass, Jazz Bass, and
Thunderbird bass.
Please read my disclaimer;
by making a purchase, you agree to my disclaimer. NOTE: CNC cut
templates are no longer available for purchase outside the US.
Luthier "Bulk" Special! CNC Cut!
Buy three
Templates at flat rate of $150 and get one FREE!
  
1
2
3
FREE
Special
does not apply to trades. Special applies to CNC cut templates only. This
package is not available for purchase outside the US. There is a luthiers
package available for outside the US here:
To
take advantage, please mention Luthier Special in comments section of
SECURE order form. I will do the rest!
|
